Delays in delivery for up to +4 working days to be expected. Sorry for the inconvenience caused.
|1 x FLEX GLUE® CLEAR|
|1 x FLEX SHOT®CLEAR|
|2 x Navy Seal (FREE)|
FLEX GLUE® CLEAR
FLEX GLUE® is an easy to use, super strong, waterproof adhesive with amazing instant grab and hold. Specially formulated to work on all types of surfaces and can be applied on dry or wet surfaces, even underwater! Solvent-free, paintable, and no run and drip so it can be applied overhead.
The formula for FLEX GLUE®
CLEAR is the best in clear adhesives. Many other clear glues are water based or solvent based and can shrink up to 40% at times. Unlike these other brands, FLEX GLUE® CLEAR will not shrink or crack. This tough, super thick waterproof glue is formulated for extra heavy-duty applications.
“Now, any project big or small, with Flex Glue you can do them all!” – Phil Swift
Flex Glue will work on:
Metals, wood, foam, rubber, tile, ceramic, marble, porcelain, glass, granite, brick. concrete, stucco, plaster, stone, masonry, drywall, sheetrock, fiberglass, some plastics & vinyl’s, composites, PVC, EPS, EPDM roofs and so much more!
*Additional applications and
substrates exist beyond this list. We recommend testing prior to use.
Surface must be free of grease, oil and dirt. Unscrew the nozzle and cut opening large enough to ensure the product can be properly dispensed. Apply liberally to one side of the surface being bonded and apply firm pressure continuously for a minimum of 10-30 seconds for instant grab to take hold.
After use, squeeze a small bead from the opening to form a plug.
Simply cut the plug when you want to reuse.
WARNING: May cause an allergic skin reaction. Avoid contact with eyes and skin. Wear gloves and safety glasses. KEEP OUT OF REACH OF CHILDREN.
Apply liberally to one side of the surface being bonded and apply firm pressure continuously for a minimum of 10-30 seconds for instant grab to take hold.
Allow 24-48 hours for curing. Will reach maximum strength in 7 days.
You may experience the glue drying up on the tip of the tube after not using it for a while. Simply insert a pin to poke and pry the dried glue to remove it from the tip.
FLEX SHOT® CLEAR
FLEX SHOT® is a super thick rubber sealant that caulks, bonds, seals virtually everything.
Flex Shot forms a watertight, flexible barrier and is so easy to use. No need for a bulky caulking gun, just push the nozzle for a perfect bead every time. No running or dripping and never shrinks or cracks.
Flex Shot will work on:
Porcelain, tile, metal, glass, fiberglass, wood, granite, stone, marble, fabric, upholstery, paper AND just about any other surface that’s free of grease and oil.
Make sure all surfaces is clean, dry, and free from dirt, grease, and oil. Use in a well-ventilated area. Hold can at a 45-degree angle, push on the nozzle and apply directly to the area being treated. Remove excess product with a dry paper towel. Tacky coating forms in about 20 minutes and will be dry to the touch. Flex Shot will be fully cured in 24 to 48 hours (depending on temperature and humidity).
For a perfect bead, apply in a steady, even motion. Adjust your speed to control the thickness of the bead. You can smooth Flex Shot out with your finger and work with the product as desired. If needed, make any adjustments immediately after the product is applied before it starts to dry.
To repair a large hole, apply Flex Shot to the side of the hole that comes into direct contact with water.
Capacity: 8oz (226g)
THE ULTIMATE WATERPROOF ADHESIVE REPAIR TAPE
Navy Seal is the repair tape that leaves all other adhesive tapes high and dry. Navy Seal is the ultimate repair tape that even works UNDER WATER! With a triple-strength adhesive layer that welds itself instantly to any solid surface, on a rubberised, super-strong flexible backing, you can rely on Navy Seal to instantly give you a secure repair regardless of how wet or damaged the hole may be. Navy Seal is so remarkable that it can even be used UNDER WATER and still gives you a reliable, waterproof, airtight seal.
GREAT FOR WET REPAIRS IN BOATS, BUCKETS AND PIPES
There are so many instances where you have a leak, or a crack in a water barrier and normal repair tape just won't work, the water removes the adhesive and the tape just falls off! Navy Seal will stick even as the water is gushing out, and never let you down! Use Navy Seal on roof leaks, gutters, down spouts, boats, outdoor equipment, mobile homes, plumbing pipes, paddling pools, and anywhere that you need a watertight seal, instantly.
STICKS TO ANY SOLID SURFACE
Navy Seal isn't just for wet repairs, you can fix holes and cracks in windows, doors, walls, vents and air ducts because Navy Seal sticks to any solid surface, use it on PVC, acrylic, metal, wood, ceramic tile, glass, rubber, fiberglass, plaster, stone, cement, vinyl and so much more!
THE TAPE THAT FIXES WHERE NO TAPE HAS FIXED BEFORE!
Navy Seal is specially formulated with a thick, flexible, rubberised backing that conforms to any shape or object. Combined with that incredible strength and waterproof application, Navy Seal is the ultimate tape that will let you make the kind of instant tape repairs you could only dream of before!
Hot or cold, wet or dry Navy Seal gets the job done-instantly!
Made In USA
Colours: Black or Clear
Dimensions Box: 9.6x9.6x12.5cm
Heat Tolerance: Suitable for up to 50°C
Materials: Synthetic Resin, PVC, PET
Weight: 240g / Net: 200g
Extras: Not suitable for painting.
1. CUT. Leave backing on tape and cut to desired dimension. Make sure to use a high quality utility knife with disposable blades or a razor blade when cutting.
2. PEEL. Remove the backing from the tape.
3. STICK. Apply tape to a clean surface and press down firmly.
4. SEAL. Using your fingers, plastic squeegee or roller, press down firmly and remove any air pockets.
*Navy Seal is a temporary, emergency repair and is not meant to be a permanent fix.
**Navy Seal may not bond to all hoses.
1. For maximum adhesion on porous surfaces, using a standard blow dryer will help the adhesives bond with the surface.
2. Navy Seal’s bond will increase with time and pressure. Continued firm pressure will help increase adhesion.
3. Once fully bonded, Navy Seal cannot be repositioned.
4. Navy Seal adhesives may resist bonding to some plasticized or waterproof materials, siliconized, greasy, oily, dirty, or porous surfaces.
5. Certain fabrics such as canvas, nylon, polyester, synthetics and some other materials may need up to 24 hours to reach maximum hold.
6. Do not kink the tape when applying to surface and avoid overlapping the tape as this can create a leak.
7. Apply the tape on flat or curved surfaces. Hard edges or fixing over joints should be avoided.
FLEX GLUE® CLEAR
Can Flex Glue be used underwater?
Yes, you can apply Flex Glue underwater and it will even cure underwater.
Can it be used as a sealant?
Flex Glue is an excellent sealant. It can fill large voids and is great for applications with uneven surfaces.
Can Flex Glue be painted?
Yes, once fully cured, it can be painted.
What is the difference between Flex Glue in the squeeze tube vs. the Pro Formula Cartridge?
All sizes have amazing instant grab technology and our Pro Formula has even more instant grab.
Is Flex Glue resistant to mold and mildew?
Yes, it is.
Is Flex Glue UV resistant?
Yes, it is.
Can it be used on porous surfaces?
Yes, Flex Glue is designed to be super thick. It bonds to porous substrates such as brick, concrete, mortar and so much more.
Can I smooth or tool it once it has been applied?
Yes, Flex Glue can be tooled or re-positioned within 10 minutes of initial application. It will dry to the touch in 1 hour.
How long does it take for the product to fully cure?
Flex Glue fully cures in 24 – 48 hours and reaches a maximum strength in seven days.
In what temperatures can Flex Glue be applied?
For easy application, we recommend applying it in temperatures between 0°F – 150°F.
What temperatures can Flex Glue withstand?
Once applied, it can withstand a wide range of temperatures from -40°F up to 200°F.
How do I clean up after using Flex Glue before it cures?
Before it cures, Flex Glue can be cleaned with a dry cloth. If necessary, most residues can be removed with isopropyl alcohol.
Can I remove Flex Glue once it’s dry?
Once dried, Flex Glue can be removed with sharp tools similar to a chisel. However, it may not be possible to separate bonded materials without damaging the surfaces.
Can I use it on drinking water, rain barrels, fish tanks etc.?
Flex Glue has not been tested on potable water sources.
Will Flex Glue Clear retain its clarity once fully cured?
Yes, it dries to a crystal-clear bond.
Will Flex Glue shrink during the curing process?
Flex Glue will not shrink, crack or peel.
Can I apply it to a wet surface?
It’s best to apply Flex Shot to a clean, dry surface. Still, Flex Shot can be applied to a wet surface, but just not in standing water.
Can I use it in an enclosed space?
Yes, but it is recommended that Flex Shot be used in a well-ventilated area.
Will it fade, dry, crack, yellow or deteriorate because of contact with household cleaners?
No, Flex Shot will not fade, dry, crack, yellow or deteriorate due to contact with household cleaners.
How long does it last?
Flex Shot will last up to 30 years and will not fade, dry, crack, yellow or deteriorate.
How many linear feet can I get out of one can of Flex Shot?
One can will cover up to forty (40) linear feet, depending on the thickness of the bead.
Can I use it on a container that holds water for drinking?
Flex Shot has not been tested for use on potable water systems.
Can I use it to fix tires or other areas with extreme pressure?
Flex Shot is not recommended for use in extreme pressure.
Are the extension tubes reusable?
Yes, extension tubes are reusable. After using Flex Shot with the extension tube, you can leave the extension tube affixed to the can of Flex Shot.
Can the extension tubes be cut to adjust the thickness of the bead?
Yes, the extension tubes can be cut to any size in order to produce the desired bead thickness.
How do I remove the extension tube that’s attached to my can of Flex Shot?
The extension tube screws on to the top of the Flex Shot can and is removed by unscrewing it in a counterclockwise direction. Do NOT attempt to remove the extension tube by pulling or yanking it off.
What temperature should I apply it?
Navy Seal can be applied in a range of temperatures of up to 50˚C.
Can I paint over it?
Most paints will not adhere to Navy Seal.
Can I use it on my radiator hose?
No. We do not recommend using Navy Seal on radiator hoses.
Can I use it on a tank used to hold gas or oil?
No. We do not recommend using Navy Seal on a gas or oil tank.
Can I use it to repair a car or bicycle tire?
No. We do not recommend using Navy Seal to repair tires due to the extreme pressure.
Can I use it on a container that holds water for drinking?
It has not been tested on potable drinking water.
What is the maximum pressure it can withstand?
The maximum pressure Navy Seal can withstand will vary based on the substrate and the conditions under which it is applied. It’s always best to test a small area first.
If I’m using it to patch an above ground pool, is it best to apply it to the inside or the outside of the pool?
Both! Navy Seal forms a super strong bond with itself, so if you’re patching a pool it’s best to first apply Navy Seal to the interior side of the pool wall and then place a second piece of Navy Seal to the exterior. Remember to cut your Navy Seal larger than the area of the leak. You do not need to drain the pool prior to applying it. Navy Seal is a temporary, emergency repair and is not meant to be a permanent fix.
Can I use it to repair an air mattress or inflatable?
Navy Seal can be used as a temporary, emergency repair to an air mattress or inflatable. However, it may not bond with all materials. Always test before use.
No reviews have been written for this product.