Phoenix Gold FreeFlight makes ironing easier with 2400W of power and continuous steam output of 48g/min, allowing you to iron several layers at once, while the Steam Burst function helps remove the most stubborn creases by releasing an intense shot of steam. Phoenix Gold FreeFlight can even steam vertically allowing you to quickly remove creases in curtains or freshen up clothes on the hanger.
The smooth, ceramic-coated soleplate effortlessly glides across all fabrics without sticking or snagging while a precision tip enables you to reach even the trickiest areas around buttons or between pleats. The Anti-Drip system stops stains from water droplets at low ironing temperatures while the Anti-Calc and Self-Clean functions help to eliminate lime scale build-up to prolong the life of the iron. There’s even an Auto-off safety setting for peace of mind, plus a ‘Ready to Use’ thermostat light indicator.
Phoenix Gold FreeFlight’s ceramic soleplate heats up from cold in less than 30 seconds, and the reheat time, when placed back in the dock, is only 6 seconds so your time isn’t wasted waiting for your iron to get to the right temperature for those stubborn creases. But, if 6 seconds is still too long, you can use Phoenix Gold FreeFlight while still attached to its dock, like a normal corded iron, for constant, non-stop steam power.
PRODUCT SPECIFICATION:
Made in China
Cord length: 1.9m approx.
Tank size: 370ml approx.
Power consumption: 2000-2400W
Power supply: 220-230V - 50/60Hz
Weights:
- Gross: 1.75kg
- Net: 1.34kg
Base material: Ceramic
Steam output: 14g/min
Shot of steam: 162g/min
Prior to first usage:
Before ironing your clothing or fabrics for the first time, it is recommended that you use Phoenix Gold Free Flight on a damp piece of cloth for a few minutes. This will ensure that any residue left over from the manufacturing process is burnt off the Ceramic Plate and won’t transfer to your clothes.
Note:
- Only use clean, pure water that contains no contaminants or additional chemicals.
- When filling the water, the steam function should be in the “off” position, if in “on” position, water may flow out from soleplate holes.
- Also, when filling the water tank, it is better to take the iron away from the base to avoid the risk of spilling water onto live parts.
How quickly does the iron heat up?
The iron heats up remarkably fast, ready to use from a cold start in less than 30 seconds.
When do I know it is ready to be used?
When the Temperature Indicator Light goes out, you can start to iron.
- If the iron is connected to the base, you can continue ironing.
- If the iron is being used separately, you can use for about 30 seconds, after the Temperature Indicator Light goes out (this will vary depending on various factors), then you need to replace the iron on the base for heating, you can continue to use again after the Temperature Indicator Light goes out.
How to use the Self-Cleaning feature?
The Self-Cleaning feature cleans inside the plate, removing impurities. We recommend using it every 10-15 days.
Directions to use:
Fill the tank up to the Maximum Level and set the Steam Selector to “OFF”.
Place the iron in the vertical position.
Turn the Temperature Control Dial to the Max position.
Plug the iron into the mains power and allow to heat for 2 minutes.
Unplug the iron, remove from the base and place it horizontal over a sink or basin.
Press the Self-Cleaning Button repeatedly for around 1 minute to activate the cleaning function. This will release both steam and water through the soleplate to clear any deposit.
Repeat above steps again if needed, particularly in hard water areas.
No reviews have been written for this product.
